Whirlpool ED2LDEXW, ED2DHEXW, ED5CHQXV dimensions Side by Side Refrigerator, Product Model Numbers

® Side by Side Refrigerator

PRODUCT MODEL NUMBERS

PRODUCT DIMENSIONS

ED2CHQXT ED2HHEXT ED5VBEXT ED5CHQXT ED5HHEXT ED2VHEXT ED2CHQXV ED5HHGXT ED5VHEXT ED2DHEXW ED2JHEXT ED2VHEXV ED5DHEXW ED5JHEXT ED5VHEXV ED2FHEXV ED5KVEXV ED5CHQXV ED2KVEXV ED2LDEXW ED5GVEXV ED5FHEXV ED5LDEXW ED5PVEXV ED5FVGXW ED2LHEXT ED2GVEXV ED2HBEXT ED5LHEXT

ED5HBEXT ED5PBEXT

Electrical: A 115-Volt, 60-Hz., AC-only 15- or 20-amp fused, grounded electrical supply is required. It is recommended that a separate circuit serving only your refrigerator be provided. Use an outlet that cannot be turned off by a switch. Do not use an extension cord.

D

top of

cabinet

A

not incl. handle

1

E

overall

Handle and door style will vary with model.

CDimensions “D” and “E” include rollers extended 3/4" (1.9 cm).

NOTE: Before performing any type of installation, cleaning, or removing a light bulb, turn the control (Thermostat, Refrigerator or Freezer control depending on the model) to OFF and then disconnect the refrigerator from the electrical source. When you are finished, reconnect the refrigerator to the electrical source and reset the control (Thermostat, Refrigerator or Freezer control depending on the model) to the desired setting.

Water: A cold water supply with water pressure between 30 and 120 psi (207 and 827 kPa) is required for the water dispenser and ice maker.

IMPORTANT: The pressure of the water supply coming out of a reverse osmosis system going to the water inlet valve of the refrigerator needs to be between 30 and 120 psi (207 and 827 kPa).

If a reverse osmosis water filtration system is connected to your cold water supply, the water pressure to the reverse osmosis system needs to be a minimum of 40 to 60 psi (276 to 414 kPa).

B

	Depth	Cab. Width	Door Width	Cab. Height	Overall Height
Model size	"A"	"B"	"C"	"D"	"E"
22 cu.ft.	31-3/8"	32-3/4"	33-1/8"	65-7/8"	66-3/4"
	(79.7 cm)	(83.2 cm)	(84.1 cm)	(167.3 cm)	(169.6 cm)
25 cu.ft.	31-3/8"	35-1/2"	35-7/8"	68-7/8"	69-3/4"
	(79.7 cm)	(90.2 cm)	(91.1 cm)	(174.9 cm)	(177.2 cm)

LOCATION REQUIREMENTS

1/2" (1.25 cm)

2" (5.08 cm)

To ensure proper ventilation for your refrigerator, allow for 1/2” (1.25 cm) space on each side and at the top. When installing your refrigerator next to a fixed wall, leave 2” (5.08 cm) minimum on each side (depending on your model) to allow for the door to swing open. If your refrigerator has an ice maker, allow extra space at the back for the water line connections.

NOTE: Do not install the refrigerator near an oven, radiator, or other heat source, nor in a location where the temperature will fall below 55°F (13°C).

Because Whirlpool Corporation policy includes a continuous commitment to improve our products, we reserve the right to change materials and specifications without notice.

Dimensions are for planning purposes only. For complete details, see Installation	Ref. 2309541C
Instructions packed with product. Specifications subject to change without notice.	02-23-09