![](/images/new-backgrounds/1087950/8795037x1.webp)
Solving common ice maker/dispenser problems
PROBLEM
Ice dispenser won’t work
Ice dispenser stops working
CAUSE
l Freezer door open
lIce bin not properly installed
. Wrong ice in bin
. Dispenser not used for extended periods, causing ice cubes to melt together
l Ice dispenser bar held in too long
l Ice attracts airborne odors; old ice
l Water quality
l Foods not properly wrapped
l Ice bin and freezer may need cleaning
l Plumbing to ice maker
lNew ice maker
SOLUTIONS
l Close the freezer door.
l Make sure bin is pushed in all the way.
l Use only crescents from ice maker. Shake the bin occasionally to keep cubes separated and to increase storage room.
lDump old ice and make a new supply.
l Wait about 3 minutes for the dispenser motor to reset.
l Large amounts of ice should be taken from the bin, not through the dispenser.
l Dump old ice and make a new supply. Store excess ice in covered container.
. Water containing minerals (such as sulfur) may require a fitter to remove.
l Wrap properly. See pages 26 and 27.
l Clean freezer and ice bin. See cleaning chart on pages 23 and 24.
l Follow Installation Instructions for proper ice maker water supply hook up. (See back of refrigerator cabinet.)
l The first few loads of ice from a new ice maker may have an
19