Using Your Refrigerator
Continued
Support tabs
Defrost pan
Changing the light bulbs
Electrical Shock Hazard
Before removing a light bulb, either unplug the refrigerator or disconnect the electricity leading to the refrigerator at the main power supply. Failure to do so could result in electrical shock or personal injury.
To change refrigerator light:
1.Disconnect refrigerator from power supply.
2.Reach behind the Control Console to find bulbs.
3.Remove bulb.
4.Replace with a
5.Reconnect power supply.
NOTE: Not all commercial appliance bulbs will fit your refrigerator. Be sure to replace bulb with one of the same size and shape.
Removing the base grille
To remove the grille:
1.Open the door.
2.Pull grille out as shown.
3.Do not remove Tech Sheet fastened behind grille.
To replace the grille:
1.Line up grille support tabs with metal clips.
2.Push firmly to snap into place.
3.Close the door.
See cleaning instructions for defrost pan and condenser coils on page 11.
Reversing the door swing
You can change the hinges on your refrigerator so the doors open the other way. Refer to the instruc- tions sheet included with your refrigerator.
