Solving common ice maker problems
PROBLEM
Ice crescents attached at corners
Ice maker will not operate or ice is not made fast enough
POSSIBLE CAUSE/SOLUTION
l This is normal. They break apart easily. Shake bin occasion- ally to keep cubes separated.
l ON/OFF lever is in the OFF (up) position. Lower lever to the ON (down) position.
l Freezer is not cold enough. Adjust temperature control and wait 24 hours.
Off-taste or odor in ice l
l
l
l
New plumbing connections can cause discolored or off- flavored ice. Discard the first few batches of ice.
Cubes are stored too long. Throw them away and make a new supply.
Foods in freezer are not wrapped properly. See “Food Storage Guide” on pages 16 and 17.
Freezer and ice bin need to be cleaned. See pages 13 and 14.
Changing the light bulb
Electrical Shock Hazard
Before removing a light bulb, either unplug the refrigerator or disconnect the electricity leading to the refrigera- tor at the main power supply. Turning the Temperature Control to the OFF position does not disconnect the refrigerator from the power supply.
Failure to do so could result in electri- cal shock or personal injury.
To change the refrigerator light:
1.Disconnect refrigerator from power supply.
2.Reach behind the Control Panel to remove bulb.
3.Replace with a
4.Reconnect refrigerator to power supply.
NOTE: Not all commercial appliance bulbs will fit your refrigerator. Be sure to replace a bulb with one of the same size, wattage and shape.
11
