Changing- - the light bulb...
| 2. Remove | bulb. |
| 3. Replace with a | |
ms- |
|
|
Adjusting the refrigerator shelves... |
|
|
Shelves can be adjusted to match the way you use | To remove | shelves: |
your refrigerator. | 1. Tilt up at front. | |
| ||
| 2. Lift up at back. | |
| 3. Pull shelf straight out. | |
| To replace | shelves: |
1. Guide the rear hooks into the slots in the shelf supports.
*113avw
Moving the meat drawer and cover
The meat drawer can beta ken out and moved the same way as the shelves. Remove the meat drawer first.
2.Tilt up front of shelf until hooks drop into slot. Lower front of shelf to level position.
... TOmm~~ememeti~IUWXandCover: Ry’
1.Slide the meat drawer out to stop.
2.Lift the front of meat drawer.
3.Slide drawer the rest of the way out.
4.Tilt cover up at front.
5.Lift up at back.
6.Pull straight out.
To replace the meat drawer and cover:
GLASS SHELVES ARE HEAVY. BE CAREFUL.
1. Guide the rear hooks of cover into the slots in the shelf supports.
2. Tilt up front of cover until rear hooks drop into slots. Lower front of cover to level position.
3. Replace meat drawer in reverse order of
Removing crispers and crisper cover...
removal.
-
To remove the crlspers:
OUT TO STOP, LlFl THE FRONT AND PULL AGAIN
REMOVE | THE ) |
GLASS | INSERT, |
1.Slide crisper straight out to stop, lift front, then slide the rest of the way out.
2.Replace in the reverse order.
To remove the cover:
1.Push up glass insert from bottom, then slide out
. with both hands.
2.Lift front of cover frame and remove cover support.
3.Lift out cover frame by pulling up and out.
To replace ihe cover:
1. Fit back of cover into notch supports on walls of
Lln THE FRAME FRONl |
I
refrigerator, then lower front into place.
| THEN THE BACK. |
| GLASS IS HEAVY. |
v | BE CAREFUL. |
2.Replace cover support with the long tab towards the front. NOTE: If the support needs ad- justment, turn base right to raise, or lefl to lower.
3.Slide back of glass insert into place, then lower front.
6
