PRODUCT DATA SHEETS

Base Grille Water Filtration System

Model WF-L200V Capacity 200 Gallons (757 Liters)

Model WF-NL120V Capacity 120 Gallons (454 Liters)

System tested and certified by NSF International against NSF/ANSI Standard 53 for the reduction of Lead, Mercury, Benzene, p-dichlorobenzene, O-Dichlorobenzene, Toxaphene, Ethyl Benzene, 1,2,4-trichlorobenzene and against NSF/ANSI Standard 42 for the reduction of Chlorine Taste and Odor and Particulate Class III.

This system has been tested according to ANSI/NSF 42/53 for the reduction of the substances listed below. The concentration of the indicated substances in water entering the system was reduced to a concentration less than or equal to the permissible limit for water leaving the system, as specified in ANSI/NSF 42/53.

Substance Reduction

NSF Reduction

Average

Influent Challenge

Maximum

Average

Minimum%

Average%

Aesthetic Effects

Requirements

Influent

Concentration

Effluent

Effluent

Reduction

Reduction

 

 

 

 

 

 

 

 

Chlorine Taste/Odor

50%

1.9 mg/L

2.0 mg/L ± 10%

0.07 mg/L

0.06 mg/L

>75%

>75%

Particulate Class lll*

85%

49333/mL

At least 10,000 particles/mL

640/mL**

312/mL

98.7%

99.0%

 

 

 

 

 

 

 

 

Contaminant

NSF Reduction

Average

Influent Challenge

Maximum

Average

Minimum%

Average%

Reduction

Requirements

Influent

Concentration

Effluent

Effluent

Reduction

Reduction

 

 

 

 

 

 

 

 

Lead:@ pH 6.5

0.01mg/L

0.14 mg/L

0.15 mg/L ± 10%

0.0014 mg/L

0.0011 mg/L

99.00%

99.21%

Lead: @ pH 8.5

0.01mg /L

0.15 mg/L

0.15 mg /L ± 10%

0.0069 mg/L

0.0042 mg/L

95.40%%

97.20%

 

 

 

 

 

 

 

 

Mercury: @ pH 6.5

0.002 mg/L

0.0059 mg/L

0.006 mg/L ± 10%

0.0009 mg/L

0.0004 mg/L

84.74%

93.22%

Mercury: @ pH 8.5

0.002 mg/L

0.0054 mg/L

0.006 mg /L ± 10%

0.0007mg /L

0.00043 mg/L

87.03%

92.03%

 

 

 

 

 

 

 

 

Benzene

0.005 mg/L

0.0157 mg/L

0.015 mg/L ± 10%

0.002 mg/L

0.00083 mg/L

87.26%

94.71%

 

 

 

 

 

 

 

 

p-dichlorobenzene

0.075 mg/L

0.210 mg/L

0.225 mg/L ± 10%

0.0005 mg/L

0.0005 mg/L

99.76%

99.76%

 

 

 

 

 

 

 

 

O-Dichlorobenzene

0.60

1.84

1.8 ± 10%

0.20

0.0418

89.13

97.73

 

 

 

 

 

 

 

 

Toxaphene

0.003

0.0143

0.015 ± 10%

0.0012

0.0010

91.60

93.00

 

 

 

 

 

 

 

 

Ethyl Benzene

0.70

2.00

2.1 ± 10%

0.40

0.085

80.00

95.75

 

 

 

 

 

 

 

 

1,2,4- trichlorobenzene

0.07

0.232

0.21 ± 10%

0.0041

0.0016

98.23

99.31

 

 

 

 

 

 

 

 

Test Parameters: pH = 7.5 ± 0.5 unless otherwise noted. Flow = 0.5 gpm (1.9 Lpm). Pressure = 60 psig (413.7 kPa). Temp. = 63°F (17.2°C).

It is essential that operational, maintenance, and filter replacement requirements be carried out for the product to perform as advertised.

Model WF-L200V:The filter monitor system measures the amount of water that passes through the filter and alerts you to replace the filter. When 90% of the filter’s rated life is used, the filter indicator light changes from green to yellow. When 100% of the filter’s rated life is used, the filter indicator light changes from yellow to red, and it is recommended that you replace the filter. Use replacement filter L200V /NL120V, part #4396701. 2005 suggested retail price of $32.99 U.S.A./ $45.99 Canada. Prices are subject to change without notice.

Model WF-NL120V:Change the water filter every

6-9 months. Use replacement filter L200V / NL120V, part #4396701. 2005 suggested retail price of $32.99 U.S.A./ $45.99 Canada. Prices are subject to change without notice.

The product is for cold water use only.

Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.

Refer to the front cover or “Accessories” section for the Manufacturer’s name, address and telephone number.

Refer to the “Warranty” section for the Manufacturer’s limited warranty.

Application Guidelines/Water Supply Parameters

Water Supply

City or Well

Water Pressure

30 - 120 psi (207 - 827 kPa)

Water Temperature

33° - 100°F (0.6° - 37.8°C)

Service Flow Rate

0.5 GPM (1.9 L/min.) @ 60 psi.

 

 

*Class Ill particle size: > 5 to < 15 um

**Test requirement is at least 100,000 particles/mL of AC Fine Test Dust.

These contaminants are not necessarily in your water supply. Performance may vary based on local water conditions.

®NSF is a registered trademark of NSF International.

14

Page 14
Image 14
Whirlpool ET9AHTXMT02 Product Data Sheets, 15 mg/L †, Model WF-NL120VChange the water filter every, 33 100F 0.6 37.8C

ET1FHTXMQ00, ET1FHTXMB02, ET1FHTXMB03, ET1FHTXMT02, ET1FHTXMQ03 specifications

The Whirlpool ET1FHTXMB01, ET1FHTXMT01, and ET1FHTXMQ01 refrigerators stand out in the market for their combination of innovative features, sleek design, and practical functionality. Each model shares a commitment to providing efficient cooling solutions suitable for various kitchen environments.

One of the most notable features of these refrigerators is their spacious interior layout. With adjustable shelves and door bins, users can customize the storage space to accommodate different food items and containers. This flexibility is especially beneficial for families or individuals who frequently purchase large quantities of groceries. The clear crisper drawers for fruits and vegetables ensure freshness and visibility, helping consumers maintain a healthy lifestyle.

Energy efficiency is a major focus of Whirlpool’s design philosophy. The ET1FHTXMB01, ET1FHTXMT01, and ET1FHTXMQ01 models are Energy Star certified, which means they meet strict energy efficiency guidelines set by the U.S. Environmental Protection Agency. This certification not only helps reduce carbon footprints but also lowers utility bills for users. The advanced cooling system regulates temperature effectively, ensuring that food stays fresh longer while using minimal energy.

Another significant characteristic of these refrigerators is their user-friendly temperature controls. The easy-to-use mechanical controls allow for precise temperature adjustments, ensuring optimal cooling for different types of food. In addition, the models are equipped with a frost-free defrost system, which prevents the buildup of ice and eliminates the need for manual defrosting, thus saving time and effort.

The sleek, modern design of these refrigerators enhances the aesthetics of any kitchen. Available in various finishes, including black, white, and stainless steel, they can seamlessly integrate with different décor styles. The textured finish also helps hide fingerprints and smudges, making maintenance easier.

In terms of technology, these refrigerators feature advanced cooling technologies that help maintain consistent temperatures throughout the unit. With the inclusion of enhanced airflow systems, items stored at different levels receive uniform cooling, further supporting food preservation.

Overall, the Whirlpool ET1FHTXMB01, ET1FHTXMT01, and ET1FHTXMQ01 refrigerators offer a compelling combination of design, efficiency, and functionality. Whether used in small apartments or larger homes, they provide a reliable solution for keeping food fresh while also contributing to energy savings and a cleaner environment.