Removing | the crispers | and crisper | cover | |||
To | remove | the crispers: |
| Pull out to the stop, | ||
1. | Slide the crisper straight out to the stop. |
| lift the front | |||
| and pull again. | |||||
2. |
| Lift the | front. |
|
| |
|
|
|
| |||
3. |
| Slide out the rest of the way. |
|
| ||
4. |
| Replace | in reverse | order. |
|
|
To remove the cover:
1.Push up glass insert from the bottom, then slide it out with both hands.
2.Lift front of cover frame.
3.Pull cover frame up and out.
4.Remove metal cover support.
To replace the cover:
1.Replace metal cover support on wall supports in front section of cabinet.
2.Fit back corner of cover frame into notch supports on walls of refrigerator, then lower front onto metal cover support.
3.Slide back of glass insert into cover frame. Then lower front to level position.
Remove the glwm inoart. Lift front of cover frame, then the back
Using the ice cube trays
If cubes are not used, they may shrink. The moving cold air starts a slow evaporation. The longer cubes are stored, the smaller they get.
To remove ice:
1.Hold tray at both ends.
2.Twist slightly.
10
