Whirlpool ETl8PKXP manual Changing the light bulb, Moving the meat pan and covet

Changing the light bulb...

WARNING: Before removing the light bulb, either unplug the refrigerator or disconnect

the electricity leading to the re- frigemtor at the main power supply. Shock and injury can occur if elec- tricity remains connected.

1 Reach behind control console to find bulb

2. Remove bulb.

3 Replace with a do-watt appliance bulb

Moving the meat pan and covet..

	to Stop. lift the	Glass is heavy.
Pullout		Be Careful.

frameFrame supporl

Removing the Meat Pan:

I, Slide the meat pan out to stop.

2.Lift the front.

3.Slide pan the rest of the way out.

4.Replace in reverse order.

Removlng the cover:

I, Push up glass insert from bottom, then slide out with both hands.

2.Lifi cover frame out of frame support

3.Tilt front of frame support up, lift at back, and pull support straight out.

4.Replace in reverse order.

Adjusting the refrigerator shelves...

Shelves can be adjusted to match the way you use your refrigerator. Glass shelves are strong enough to hold bottles, milk and other heavy food items.

Gloss shelves ore heavy Be corefui.

To remove glass shelves:

1.Tilt up at front.

2.Lift up at back.

3.Pull shelf straight out.

To replace:

1.Guide the rear hooks into the slots in the shelf supports.

2.filt up front of shelf until hooks drop into slot. Lower front of shelf to level position.

Removing crispers and crisper cover...

Pull Out to Stop. Lift the Front Removing the Crispers:

1. Slide crisper straight out to stop, Mt front, then slide the rest of the way out.

2 Replace in the reverse order

Removing Cover:

1 Push up glass insert from bottom, then slide out with both hands.

2 Lift front of cover frame and remove cover support 3 Lift out cover frame by pulling up and out

Remove the

Glass Insert,

Lift the Frame Front, then the Back

Glass Is heavy. Be Careful.

Redacina Cover:

iit back\f cover Into notch supports on walls of refrigerator, then lower front into place.

Replace cover support with the long tab towards the front. Note: If the support needs adjustment. turn base right to lower, or lefi to raise. Slide back of glass Insert into p!ace, then lower front

6