Setting the controls...
Controls for the refrigerator and freezer are in the refrigerator. When the refrigerator is plugged in for the first time...
1.Set the REFRIGERA- TORCONTROL to 3.
2.Set the FREEZER CONTROL to B.
Give the refrigerafor time to cool down com- pletely before adding food. (This may take sev- eral hours.)
These sktlngs should be about right for nor- mal household refrlgemfor usage.
The controls will be set about right when milk or juice is as cold as you like and when ice cream is firm.
Changing the control settings...
If you need to adjust temperatures in refrigerator or freezer, use the settings listed in the chart below.
CONDITION:REASON: ,.,f/.mw.,. I
l Adjust the Refrigerator Control first.
l Wait at least 24 hours between adjustments.
lThen adjust the Freezer Control if needed.
*~1.. ,,_.“,_,.. __I | CONTROL | SETTINGS: |
|
QUESTIONS?
...caII your
If Refrigerator Section is
TOO WARM
If Freezer Section is
TOO WARM
.___yI v-
If Refrigerator Section is
Door opened often
Large amount of food added
Room temperature too warm
Door opened often
Large amount of food added Very cold room temperature
(can’t cycle often enough)
Controls not set correctly for your conditions
Refrigerator
Freezerd
Refrigerator
Freezeri
Refrigerator2
Freezer6
service assistance telephone number
(page 14I.
TOO COLD | 1 - |
| ||||||||
| ||||||||||
If ICE isn’t |
| Heavy | ice | usage | Refrigerator |
| ||||
MADE FASTENOUGH | Very cold room temperature | Freezer | i | |||||||
(can’t | cycle |
| often enough] | II | ||||||
|
| |||||||||
If BOTHSECTIONS | Door opened |
| often | Refrigerator | 4 | |||||
are | TOO WARM | Large | amount | of food added | Freezer | B | ||||
|
|
| Very warm or very cold |
|
| |||||
| room | temperatures |
|
| ||||||
| .<t;%h*sl- |
|
|
Power Saving Control...
The Power Savlng Control on the Control Con- SOle operates electric heaters around the door openings. These heaters help keep moisture from forming on the outside of the refrigerator.
POWERSA”El
1.Use the “CONSUMESLESSENERGY”setting when humidity is low.
2.Use the “REDUCESEXTERIORMOISTURE”setting if moisture forms on the outside of the refrigerator.
4Dml
5