Changing the light bulbs

Electrical Shock Hazard

Before removing a light bulb, either unplug the refrigerator or disconnect the electricity leading to the refrigerator at the main power supply.

Failure to do so could result in electrical shock or personal injury.

To change the refrigerator light:

1.Disconnect refrigerator from power supply.

2.Reach behind the Control Panel to remove bulb.

3.Replace with a 40-wattappliance bulb.

4.Reconnect refrigerator to power supply.

NOTE: Not all commercial appliance bulbs will fit your refrigerator. Be sure to replace a bulb with one of the same size and shape.

Removing

the base grille

To remove the grille:

Condenser coils

1.Open refrigerator door.

2.Pull base grille forward to release the support tabs from the metal clips.

3.Do not remove Tech Sheet fastened behind the grille.

To replace the grille:

1.Line up grille support tabs with metal clips.

2.Push firmly to snap into place.

3.Close refrigerator door.

See cleaning instructions for defrost pan and condenser coils on page 16.

13

Page 13
Image 13
Whirlpool ET18HT, ETZOTK, ET18TK manual Changing the light bulbs, Removing Base grille