Using your freezer
Setting the temperature control...
To start, turn control to the middle of the dial Thus setting is designed to maintain the temperature at or near O’F ( 17 8 ‘C) under normal operating conditions.
The Power Saving Control...
operates electric heaters These heaters help pre- vent moisture from forming on the outsrde of the freezer when humidrty IShrgh
1 Use the OFF setting when humidity IS low
2 Use the ON setting only if moisture forms on the outslde of the freezer
Adjusting the temperature control...
1 Turn control to higher number for colder temper- atures.
2 Turn to lower number for less cold temperatures
Cooling freezer first...
1 Allow freezer to cool 6 to 8 hours before filling with frozen food.
2 Let it cool overnight before adding large amount of unfrozen food.
Note: When freezer is frrst started, the compressor WIII run constantly until the cabrnet IScooled It may take up to 6 to 8 hours or longer, depending on room temperature and the number of times the freezer door IS opened
After the cabinet IS cooled, the compressor will turn ON and OFF as needed to keep the freezer at the proper temperature
Changing the light bulb...
Unplug the freezer first.
1 Remove the lrght shield from the side of the control panel Depress the back of the shreld to release the tabs, then pull away
2 Replace bulb wrth a 40.watt applrance bulb
3 Replace the lrght shield Insert the shield tabs in the slots, then press the shield to snap Into place
Adjusting the basket shelf...
To remove basket shelf:
1.Remove food from basket
2.Slide basket straight out to stop.
3.Lift front.
4.Slide the rest of the way out
To replace basket shelf:
1.Fit back of basket shelf on top of guide stops on bottom of guides.
2.Lift front, then slide the basket until it clears the guide stops.
