® 2 Door Upright Freezer
PRODUCT MODEL NUMBERS
EV209NBTQ
Electrical: A 115 Volt, 60 Hz., AC only 15 or 20 amp fused (or circuit breaker), grounded electri- cal supply is required. It is recommended that a separate circuit serving only your freezer be provided. Use an outlet that cannot be turned off by a switch. Do not use an extension cord.
Water Supply: Connect the ice maker to a cold water line with water pressure between 30 and 120 psi.
OVERALL DIMENSIONS
A
B
C
Door swing is
| Depth | Cabinet Height | Width |
Model | “A” | “B” | “C” |
EV209NBTQ | 30.2” | 67.0” | 33.0” |
LOCATION REQUIREMENTS
3" (7.5 cm) |
3" (7.5 cm) |
Allow at least 3 in. (7.5 cm) of air space at the top and on both sides of the freezer and 1 in. (2.5 cm) between the back of the freezer and the wall. If the freezer is to be against a wall, leave extra space on the hinge side so the door can open wider.
NOTE: This freezer may be installed side by side with another refrigerator or freezer. Allow for a 3 in. (7.5 cm) clearance at the top and sides and a 1/4 in. (0.64 cm) clearance between the appliances.
IMPORTANT: Do not install the freezer near an oven, radiator, or other heat source, nor in a location where the temperature will fall below 40°F (5°C).
Because Whirlpool Brand policy includes a continuous commitment to improve our products, we reserve the right to change materials and specifications without notice.
Dimensions are for planning purposes only. For complete details, see Installation | Ref. M07.021.0 |
Instructions packed with product. Specifications subject to change without notice. |
