INSTALLATION

REQUIREMENTS

Tools and Parts

Assemble the necessary tools and supplies before beginning the washer installation. The parts supplied are in the washer drum.

Tools needed for connecting the water inlet hoses

■Pliers (that open to 1 ⁹⁄₁₆ in. [39.5 mm])

■Flashlight (optional)

Tools needed for installation

■Open end wrench ⁵⁄₈ in. (17 mm) and ½ in. (13 mm)

■Level

■Wood block (2" x 4")

■Ruler or measuring tape

Parts supplied:

Optional Pedestal

A pedestal may be purchased separately for this washer. This pedestal will add about 13 in. (33 cm) to the height of your unit for a total vertical height of approximately 51 in. (130 cm).

Optional Pedestal

To order, call the dealer from whom you purchased your washer or refer to the “Assistance or Service” section of this manual. Ask for model number LAB2700LQ.

Beaded strap

Transport bolt hole plug (4)

Alternate Parts You May Need

Your installation may require additional parts. If you are interested in purchasing one of the items listed here, call the toll-free number on the cover or in the "Assistance or Service" section.

If You Have

You Will Need to Buy

 

 

Laundry tub or

Sump pump system (if not already

standpipe taller

available)

than 96 in. (2.4 m)

 

 

 

Overhead sewer

Standard 20 gal. (76 L), 30 in. (76.2 cm)

 

tall drain tub or utility sink and sump

 

pump (available from local plumbing

 

suppliers)

 

 

Floor drain

Siphon break, Part Number 285834;

 

additional drain hose Part Number

 

8318155; and connector kit, Part

 

Number 285835

 

 

Drain hose too

Drain hose extension kit, Part Number

short

285863

 

 

Water faucets

2 longer water fill hoses:

beyond reach of

6 ft (1.8 m) Part Number 76314,

fill hoses

10 ft (3.0 m) Part Number 350008

 

 

Location Requirements

Selecting the proper location for your washer improves performance and minimizes noise and possible washer “walk.”

Your washer can be installed under a custom counter, or in a basement, laundry room, closet, or recessed area. (See “Drain System.”)

Companion appliance location requirements should also be considered. Proper installation is your responsibility.

You will need

■A water heater set to deliver 120°F (49°) water to the washer.

■A grounded electrical outlet located within 5 ft (1.5 m) of where the power cord is attached to the back of the washer. (See “Electrical Requirements.”)

■Hot and cold water faucets located within 4 ft (1.2 m) of the hot and cold water fill valves, and water pressure of 20-100 psi (137.9-689.6 kPa).

■A level floor with a maximum slope of 1 in. (2.5 cm) under entire washer. Installing the washer on carpeting is not recommended.

■A sturdy and solid floor to support the washer with a total weight (water and load) of 400 lbs (180 kg).

Do not operate your washer in temperatures below 32°F (0°C). Some water can remain in the washer and can cause damage in low temperatures.

4

Page 3 Page 5
Page 4
Image 4
Whirlpool Front-Load Washer Installation Requirements, Tools and Parts, Optional Pedestal, Alternate Parts You May Need
Page 3 Page 5

Front-Load Washer specifications

Whirlpool has established itself as a leader in home appliances, and its Front-Load Washer is a standout model that embodies innovation and efficiency. Designed to meet the needs of modern households, this washer features a sleek, space-saving design that not only enhances your laundry room but also provides ample capacity for family-sized loads.

One of the main features of the Whirlpool Front-Load Washer is its advanced washing technology. Equipped with Adaptive Wash Technology, the washer automatically adjusts the cycle settings based on the size of the load and the amount of soil in the clothes. This ensures optimal cleaning performance while conserving water and energy, making it an environmentally-friendly choice.

Energy efficiency is further enhanced with the Energy Star certification, which signifies that the washer meets stringent energy-saving guidelines. Users can save on utility bills while also contributing to a sustaining environment. The washer uses less water and energy per load compared to traditional top-load models, allowing for impressive cleaning without excess waste.

The precision cleaning system is another key characteristic of the Whirlpool Front-Load Washer. This feature combines several technologies to ensure that dirt and stains are effectively eliminated. The efficient wash action and specialized wash motions work together to provide a thorough clean, while the sensitive drying technology gently tumbles clothes to prevent overdrying, preserving fabric quality.

Moreover, the washer offers a variety of wash cycles to accommodate different fabrics and cleaning needs. From delicate cycles for gentle fabrics to heavy-duty options for sturdy items like towels and bed linens, users can select the most suitable settings for their laundry.

Additional features include a smooth, durable drum that is designed to be gentle on clothes, as well as a delay start option that allows you to schedule washes at your convenience. The user-friendly control panel with intuitive buttons and a digital display makes selecting the right cycle a breeze.

Overall, the Whirlpool Front-Load Washer combines innovative technology with intuitive design, making it a top choice for households looking for efficiency, performance, and ease of use in their laundry routines. Whether you're washing a small load of delicates or tackling a large pile of family laundry, this washer is equipped to handle it all with precision.
Top Page Image Contents