Before | starting | your | dishwasher | OPTION SELECTOR,BUTTONS | ||||||
1. Read “Important Safety Instructions” on page |
| |||||||||
| 2 before starting your dishwasher. |
|
|
| ||||||
2. | Spin | the | Upper | and | Lower | Spray | Arms to |
| ||
| make sure nothing will stop them from turning |
| ||||||||
| freely. |
|
|
|
|
|
|
|
| |
3. | Push door | firmly | when | closing | and | itwill | auto- |
| ||
| matically | latch. |
|
|
|
|
|
| ||
4. | Run | hot water, | at sink | where | dishwasher | will |
| |||
| be connected, |
| until it is hot. Turn off water. | See |
| |||||
| page | 15 for | connecting | instructions. |
|
|
| |||
Starting your dishwasher CYCLESE&OR~~~~~~
POTS & PANS cycle...
1.Push POTS & PANS Cycle Selector Button.
2.Push button(s) for option(s) desired.
3.Turn Cycle Control Knob clockwise to dot marked POTS & PANS.
-POTS & PANS and HEAVY WASH Cycles share the same spot on the dial. The Cycle Selector Button determines which cycle operates.
HEAVY WASH cycle...
1.Push HEAVY WASH Cycle Selector Button.
2.Push button(s) for option(s) desired.
3.Turn Cycle Control Knob clockwise to dot marked HEAVY WASH.
-HEAVY WASH and POTS & PANS Cycles share the same spot on the dial. The Cycle Selector Button determines which cycle operates.
The dishwasher | will automatically | start that | The dishwasher | will automatically | start that |
cycle. |
|
| cycle. |
|
|
NORMAL WASH cycle...
1.Push NORMAL WASH Cycle Selector Button.
2.Push button(s) for option(s) desired.
3.Turn Cycle Control Knob clockwise to dot marked NORMAL WASH. The dishwasher will
automatically start that cycle.
RINSE & HOLD cycle...
1.Push NORMAL WASH Cycle Selector Button,
2.Select AIR DRY Option only.
3.Turn Cycle Control Knob clockwise to dot marked RINSE St HOLD. The dishwasher will
automatically start that cycle.
Selecting a cycle
POTS & PANS Cycle
Maximum cleaning for cooked- or
the dishwasher automatically heats the water to 145°F (63°C) in both washes and the last rinse (marked ‘1. Cycle time will be about 1% to 2
hours, depending on time needed to heat water.
LOW ENERGY WASH cycle...
1.Push LOW ENERGY WASH Cycle Selector Button.
2.Push button(s) for option(s) desired.
3.Turn Cycle Control Knob clockwise to dot marked LOW ENERGY WASH. The dishwasher
will automatically start that cycle.
