Using
your Dryer
1. Put the sorted load in the dryer and close the door tightly.
2.Turn the Cycle Control Knob to the cycle you want.
lUse LIGHT for small loads of light- weight fabrics. The LIGHT Cycle runs for the least time Use LIGHT also to damp dry loads for Ironing.
l Use MED for normal size loads of light or medium welght fabrics (sheets, pil- lowcases, shirts, etc.).
l Use HEAVY for normal size loads of heavy fabrics [towels, jeans, corduroys] l Use EX HEAVY for large loads or for heavy bulky Items (quilts, spreads, blan- kets, etc )
SUGGESTION:
You can set the Cycle Control Knob
anywhere past, between or below
the EX HEAVY and LIGHT settings. For the first few loads
lSet the pointer In the middle of the load setting.
lIf the load IS drier than you want, set It to the right [for less time] the next time.
l If the load ISnot as dry as you want, set it to the left (for more time] the next time
For example:
lUse PERMANENT PRESS for a longer
period of
l If laundry is left in the dryer after It has stopped tumbling. use the Tumble
Press * Control setting [page 6) to help remove the wrinkles
3.Set TEMPERATURE SELECTOR.
l Turn the TEMPERATURE SELECTOR to
the drying temperature needed for the load. See page 5 for suggested settings
4.Push the Start Button.
lMake sure the door ISclosed and Cycle Control is set. If the door IS opened during the cycle, the dryer will stop. To restart the dryer, close the door and push the Start Button
5. To stop the dryer:
l | Open | the | door. |
|
|
| ||
l | Or, | turn | the | Cycle | Control | Knob | to one | |
of | the | OFF | posItIons |
|
|
| ||
l | To | change |
| the | setting | while | the | |
dryer | is | running, | turn the | Cycle | Control | |||
Knob, either way, so It points to the | ||||||||
setting | you | want. |
|
|
| |||
IMPORTANT To help reduce wrin- kling, take the load from the dryer as soon as tumbling stops. This IS very
important for permanent press, knits and other svnthetlc fabrics.
