Whirlpool GLE7900XM manual Drying tips, Tumble Press Setting, Times

Drying tips

The dryer does not heat when the Temperature Selector is set on FLUFF AIR. This setting can be used to fluff bedding, pillows and clothing or to dust drapes.

It can also be used to damp-dry heat sensitive items...such as plastic shower curtains, rubber-backed

rugs, plastic tablecloths,foam rubber pillows, stuffed toys, sneakers, etc.

1.Set the Temperature Selector to

FLUFF AIR

2.Set the Control Knob to the PERMA- NENT PRESS Cycle and select the number of minutes you want.

3.Push the START Button.

TUMBLE PRESS” Setting

1.Set Temperature Selector to PERM’T PRESS/HEAVY HIGH.

2.Set Control Knob to TUMBLE PRESS.

3.Push START Button.

The load will tumble in heated air for 5 minutes. The heat shuts off and the dryer continues to tumble the load for 10 more minutes.

For best resultsTUMBLE PRESS only a few items at a time. Put them on hangers or fold them as soon as the dryer stops.

When drying a load with different

kinds and weights of fabrics, use the cycle suggested for the lightest fabrics. When the dryer stops, remove dry items and reset the control.

The TUMBLE PRESS setting removes wrinkles from dry clothing such as items that may have been packed in a suitcase, closet, or items not removed from the dryer.

Drying	times
Drying	times	will vary	depending		on:
l amount of moisture in the clothes.
l type and werght of the fabric.
l size of the load.
l room	temperature		around	the
dryer.
l temperature		of the	wash	rinse
water.
l omount of lint in the lint screen.
l dryer	temperature		selection.

See page 6 in your”Dryer Guide” for more Information.

7