Using
Your Washer
Start your washer after you put in
detergent, the load, and any other
laundry aids according to InformatIon on page 3
1. Set the TEMPERATURE SELECTOR.
l Match the wash water temperature to the type of fabrics and SOIIS betng washed All rinses are cold
2.Select a Cycle and Start the Washer.
l Push the Cycle Control Knob In and turn It to the right (clockwlse)
l Stop when the pointer IS on the nu’n Ser of q/flutes you want in the cycle you want NOTE: In the REGULAR HEAVY
and KNIT GENTLE Cycles, the washer WIII fill only If the Control Knob points to a fill area
l Instructions on which cycle to use for each fabric type are under the IId
l To start the washer, pull the Cycle Control Knob out When the cycle IS over, the washer will stop
l To stop the washer at any time during a cycle, push the Control Knob in. Pull It out to restart the washer l To change a setting, push the Con- trol Knob in to stop the washer. Then turn the Control Knob to the right (clock- wise) to the setting you want. Pull the knob out to start the washer
