Winterizing
Because some water stays in the washer, freez- ing can cause a lot of damage. If your washer is stored or moved during the cold weather..
1.Shut off both water faucets. Discon- nect and drain water inlet hoses.
2.Put a quart of
3.Set the washer for c DRAIN and SPIN (see page 81. Let it run for a bout 30 seconds to mix the antifreeze and water.
To use the washer again.. .
1.Flush water pipes and hoses.
2.Connect hoses to the washer.
3.Turn on the water faucets.
4.Run the washer through a com- plete cycle with one cup of deter- gent to clean out the antifreeze.
10
