Operating instructions, Starting Your Washer

Operating instructions

Starting Your Washer

Be sure to measure and add detergent, then place a sorted load in the washer before starting it.

Select CYCLE and WASH TIME; 1. Start the Washer

Fill Area

A. Push In the Control Knob and

turn ii to the rlght. It must be pushed in and turned only clockwise.

B. Stop on a number in the cycle you want. The numbers are the minutes of wash time. The drawing shows 10minutes of agitation in the REG- ULARNORMAL Cycle. NOTE: The washer will fill only when the knob points to a FILLarea.

C. Start the washer by pulllng out the Control Knob. After filling, the washer will agitate for the selected number of minutes.

D. To stop the washer at any time push In the Control Knob. To restart the washer, pull out the Control Knob.

Page 4

Image 4

Whirlpool LA34ooxs manual Operating instructions, Starting Your Washer, Select Cycle and Wash Time 1. Start the Washer

Contents

Automatic Washer Contents Parts and features Addifional Safety lnsfrucfions Your Responsibilities Starting Your Washer Operating instructionsSelect Cycle and Wash Time 1. Start the Washer To Select a Wash To Select a Waterlevel Regular Heavy Cycle What Happens in Each CycleShort Cycle ’ ~f?iic&q~~~ Spin 1parts01 load to help For a rinse and spin Other operating instructionsFor a drain and spin Carikg for your washer Winterizing To use the washer again If you need service? If you need FSP’ replacement parts?Before calling for Assistance If you need as&stance% Warranty