Whirlpool LA5100XT What happens in each cycle

3. Select cycle and wash time
Start the washer
l Push in the Cycle Control Knob and
turn it to the right.
l Stop on the number in the wash cycle
you want. The numbers are minutes of
wash time.
l Start the washer by pulling out the
Cycle Control Knob. The washer will
fill to the selected water level with the
selected wash water temperature.
After filling, the washer will agitate for
the selected number of minutes.
l To stop the washer at any time, push
in the Cycle Control Knob. To restart
the washer, pull out the Cycle
Control Knob.
What happens in each cycle
Each cycle has been designed for dif-
ferent kinds of fabrics. Numbers on the
dial in each cycle are the minutes of
wash agitation time.
When the Cycle Control Knob is set
to a number and pulled out, the washer
fills before agitation and timing starts.
After agitation starts, the knob turns
clockwise until it points to OFF and the
cycle ends.
The washer will pause briefly through.
out each cycle. These pauses are
normal. They allow for the reversing
of the motor, normal washer operation
and the cool-down portion of the
PERMANENT PRESS Cycle.
5