Starting/stopping the washer
l Start the washer by pulling out the Cycle Control Knob. The washer will fill to the selected water level with the selected wash water temperature. The washer will begin agitating immediatefy after filling. Agitation can occur with the washer lid up or down.
l To stop the washer at any time, push in the
.Cycle Control Knob. To restart the washer, pull out the Cycle Control Knob.
What happens in each cycle
Each cycle is designed for different kinds of fabrics.
When the Cycle Control Knob is set to a number and pulled out, the washer fills before agitation and timing starts. After agitation starts, the knob turns clockwise until it points to OFF and the cycle ends.
The washer pauses briefly throughout each cycle. These pauses are normal for washer operation.
6
