Whirlpool LE4900XS, LE4930XS, LG4931XS eaning should be done only by a qualified person, Lint

Lint	screen
		The	lint screen
		is inside		the dryer
		drum,	on	the
		back	wall. Clean
		it before		each
		load.	A screen
		blocked		by lint
Pull	straight	can increase
	out.	drying	time.

1.Use the finger holes to pull the lint screen straight out.

2.Lightly squeeze the body, as shown, while pulling the cover off.

3.Roll lint off the screen with your fingers. DO NOT rinse or wash the screen. Wet lint is hard to

remove.	Squeeze	body;
	pull cover	off.

4.Replace the cover on the body of the lint screen.

5.Push the lint screen straight back in until it clicks into place.

Lint removal

Lint can gather inside the dryer and create a FIRE HAZARD. this lint should be removed at least every 2 to 3 years, or more often, depending on dryer usage.

ELECTRIC DRYERS GAS DRYERS

eaning should be done only by a qualified person.

1. Remove back panel (electric) or lower access panel (gas].

2. Avoid damaging wires, thermostats, funnel or igniter.

3. Remove lint from shaded area - see art-with a soft brush or vacuum cleaner.

4. Replace panel; reconnect and re-level dryer.