Whirlpool LE4930XM Lint Screen, Lint removal, Cleaning should be done, Only by a qualified person

Lint	screen
		The	lint	screen		3. Roll	lint	off the
		is inside the			dryer	screen		with
		drum,	on	the		your	fingers.
		back	wall.		Clean	DO	NOT rinse
		it before		each		or wash		the
		load.	A screen			screen.		Wet
		blocked		by	lint	lint	is hard to
Pull	straight	can increase				remove.		Squeeze	body;
	out.	drying	time.					pull cover	off.

1.Use the finger holes to pull the lint screen straight out.

2.Lightly squeeze the body, as shown, while pulling the cover off

4.Replace the cover on the body of the lint screen.

5.Push the lint screen straight back in until it clicks into place.

CAUTION: RUNNING THE DRYER WITH THE LINT SCREEN LOOSE, DAMAGED OR MISSING CAN CAUSE OVERHEATING, DAMAGE TO FABRICS AND DRYER PARTS, OR CREATE A FIRE HAZARD.

Lint removal

Lint can gather inside the dryer and create a fire hazard. This lint

should be removed every 2 to 3 years, or more otten, depending on dryer usage.

Cleaning should be done

l	Avoid electrical		shock
	hazard	- unplug	power
0	supply cord or turn off
	electrical	power.

l Avoid injury or damage - do not put hands inside cabinet.

’ Make sure dryer is cool.

only by a qualified person.

1.Remove back panel.

2.Avoid damaging wires or ther- moStats

3.Remove lint from shaded area - see art - with a soft brush or vacuum cleaner.

4.Replace panel; reconnect and re level dryer.