Operating instructions
Dryer cycles and settings Cool down times
In all cycles, the heat shuts off before the dryer stops tumbling. This cool down time helps:
l keep wrinkles from setting in.
l make handling the hot load items easier.
The PERMANENT PRESS Cycle helps provide the special care that perma- nent press and synthetic fabrics need...a period of heated drying followed by a 10 minute cool down. The chart on page 4 suggests time
and temperature settings for different kinds of loads.
The EX HEAVY, HEAVY, MEDIUM and LIGHT cycles describe the loads they are designed to drY.The chart on page 4 tells what is meant by EX HEAVY, HEAVY, MEDIUM and LIGHT loads.
At each settrng, the dryer will run about long enough to dry the load described by the setting. Example:
The HEAVY Cycle IS designed to be long enough to dry a load of heavy fabrics (towels, jeans, corduroys, etc.) when the Temperature Selector is set on PERM’T PRESS/HEAVY HIGH.
If the load is not as dry as you want, set the dial more to the lett the next time you dry that kind of load.
If the load is dryerthan You want, set the dial more to the right the next time you dry that kind of load.
I | 10 MINUTES | 5 MINUTES |
COOL DOWN | COOL DOWN |
The PERMANENT PRESS Cycle has 10 minutes of cool down time at the end of the cycle.
All other cycles have S minutes of cool down time.
6
