![](/images/new-backgrounds/1320461/32046123x1.webp)
Carlng For Your Dryer
Contlnued
lgnlter Funnel
Gas dryer wlthout lower front accem
panel
-8 dryer8 wlthout IOWW front 8cce88 panel
tl your dryer is gas and does not have a tower front access panel:
1.Unplug the power supply cord or turn off the electrical power.
2.Remove lint screen.
3.Remove two screws from lint screen area.
4.Open top by pulling forward and up at each front comer (top is hinged at rear).
5.Remove two internal screws from front panel flanges (near top front comers). Slightly lift panel off lower clips and pull forward to disengage
from drum. Hold drum in place .. when pulling panel forward to prevent drum from dropping down.
6.Remove door switch wires, if necessary. Note the wire/terminal positions to assure proper reassembly.
7.Remove lint from
6.Reassemble in reverse order. Be sure drum and drum seals are positiined properly when reassembling. Top and front panels must be securely in place before operating dryer.
9.Reconnect power and relevel dryer, if necessary.
12