Mixed loads | Drying times |
When drying a load with different
kinds and weights of fabrics, use the cycle suggested forthe lightest fabrics. When the dryer stops, remove dry items and reset the control.
To reduce wrinkling, take the load
from dryer as soon as tumbling stops. This is important for permanent press, knits and synthetic fabrics.
*
Dryrng | times | will vary | depending | on: | ||
l amount of moisture in the clothes. |
| |||||
. type and weight of the fabric. |
| |||||
l size of the load. |
|
|
| |||
l | room | temperature | around | the |
| |
l | temperature | of the | wash | rinse |
| |
l amount of lint In the lint screen. |
| |||||
l | dryer | temperature | selection. |
| ||
| zag | e 6 in your”Dryer | Guide” |
| ||
for more | information. |
|
|
| ||
Lint signal
Clean lint screen before each load. If you neglect to clean your lint screen, the signal will sound. The (whistle tone] signal lets you know the air flow is being restricted. Restricted air flow reduces drying efficiency.
Turn off the dryer and clean the lint screen as shown on page 9.
