Operating Instructions Continued
‘5 P-
3’ \?
UsingTUMBLEPRESS”
The TUMBLE PRESS setting removes wrinkles from clothing that has been packed in a suitcase or closet, and from items not removed from the dryer at the end of a cycle.
1.Set the Cycle Control Knob on
TUMBLE PRESS.
2.Press the PERM’T PRESS Tempera- ture Selector.
3.Push the Start Button.
The load will tumble in heated air for
15 minutes. Then the dryer will tumble the clothes for 5 more minutes without heat.
For best results, put only a few items at a time in this cycle. As soon as the dryer stops, put the items on hangers or fold them.
End-of-cyclesignal
The dryer sounds a signal to let you know when the cycle is finished. The signal cannot be turned off and is not adjustable.
The signal is helpful when you are drying permanent press, synthetic and other items that should be taken out as soon as the dryer stops.
Lintsignal
Clean the lint screen before each load. If you neglect to clean your lint screen, a signal will sound. The (whistle tone) signal lets you know the air flow is being restricted. Restricted air flow reduces drying efficiency.
Turn off the dryer and clean the lint screen as shown on page 11.
