Drying times | Mixed loads |
Drying times will vary depending on: l amount of moisture in the clothes.
l type and weight of the fabric. l size of the load.
l room temperature around the dryer.
l temperature of the wash rinse water.
l amount of lint in the lint screen.
l dryer temperature selection.
See Paqe 6 in Your “Drver Guide” for more informaiion.
When drying a load with different kinds and weights of fabrics, use the setting suggested for the lightest fabrics.
End-of-cycle signal
‘/
P
3 /? \’
The dryer will beep 5 times to let you know when the cycle is finished. It will also beep after each FINISH GUARD tumbling. The signal cannot be turned off and is not adjustable.
The signal is helpful when you ore drying per- manent press, synthetics and other items that should be taken out as soon as the dryer stops.
\
Lint signal
Clean lint screen before each load. If you neglect to clean your lint screen, the signal will sound. The (whistle tone] signal lets you know the air flow is being restricted. Restricted air flow reduces drying efficiency.
Turn off the dryer and clean the lint screen as shown on page 10.
