Whirlpool LGR3622B Using the Automatic Perm. Press /Reg. cycle, Using the Timed Drying cycle

Using the Automatic Perm. Press /Reg. cycle

Use the Penn. Press/Ret& cyde to dry permanent press and some synthetic fabrics. Your dryer senses the dryness of the load and automatically shuts off when the selected dryness is reached. For the fist few loads:

1.Set the Cycle Control Knob to point to the asterisk (a) in your Perm. PressIReg. cycle.

2.Feel the dried items when the dryer stops.

lIf the load is drier than you like, select LESS dry, or a setting closer to LESS dry, the next time you dry a similar load.

lIf the load is not as dry as you like, complete drying using the Timed Drying

cycle. Select MORE dry, or a setting closer to MORE dry, the next time you dry a similar load.

The Cyde Control Knob will not move until the load is almost dry or cool-down is reached. After cool-down is complete, the Cycle Control Knob automatically moves to an OFF area and tumbling stops.

Using the Timed Drying cycle

Use the Timed Drying cycfe to complete drying if some items are damp after Penn. Press/Reg. cycle drying. Timed Drying is also useful to dry delicate items that require a short drying time, or large bulky items.

1.Turn the Cycle Control Knob to the number of minutes you want in the Timed Drying cycle.

2.For a damp dry, turn the Cycle Control Knob to 30 minutes or less.

The last few minutes of this cycle are without heat to help make the load easier to handle.

-622sLER3622B, LGR3622B

UN136228 LER3622B. LGR3622B

8