End-of-cycle signal
The dryer sounds a signal to let you know when the cycle is finished. The signal cannot be turned off and is not adjustable.
The signal is helpful when you are drying
permanent press, synthetics and other items that should be taken out as soon as the dryer stops.
Lint signal
If you neglect to clean your lint screen, the signal will sound. The [whistle tone] signal lets you know the air flow is being restricted. Restricted air flow reduces drying efficiency.
Turn off the dryer and clean the lint screen as shown below.
Lint screen
Clean the lint screen before each load. A screen blocked by lint can
increase drying time and may be a FIREHAZARD.
Open the lid and pull the lint screen straight out.
dryer with the lint screen
tloose,ARNING:damagedDO NOTor missingrun the. Doing so can cause over-
heating, can damage fabrics and can be a FIRE HAZARD.
ROLL the lint off the screen
with your fingers.
DO NOT rinse or wash the screen.
Push the screen firmly back into place.
