Changing the control
If you need to adjust temperatures in refrigerator or freezer, use the settings listed in the chart below as a guide. If you have questions, call our Consumer Assistance Center number. (See page 21.)
CONDITION:REASON:
settings
l Adjust the Refrigerator Control first.
l Wait at least 24 hours between adjustments. l Then adjust the Freezer Control if needed.
RECOMMENDED
CONTROL SETTINGS:
If Refrigerator Section is
TOO WARM
If Freezer Section is
TOO WARM
Door opened often
Large amount of food added Room temperature too warm
Door opened often
Large amount of food added Very cold room temperature (can’t cycle often enough)
Refrigerator 6
FreezerD
Refrigerator
Freezer:
If Refrigerator | Controls | not set correctly | Refrigerator | 2 |
Section is | for your | conditions | Freezer | A |
TOO COLD |
|
|
|
|
If ICE isn’t
MADE FAST ENOUGH
Heavy ice usage
Very cold room temperature (can’t cycle often enough)
Door opened often
Large amount of food added Very warm or very cold room temperatures
Refrigerator
Freezerii
Refrigerator
FreezerE
Adjusting the refrigerator
Shelves can be adjusted to match the way you use your refrigerator. Glass and wire shelves are strong enough to hold bottles, milk and other heavy food items.
To remove shelves:
1.Remove items from shelf.
2.Tilt shelf up at front.
3.Lii back of shelf.
4.Pull shelf straight out.
To replace shelves:
1.Guide the rear shelf hooks into the slots in the shelf supports on cabinet wall.
2.Tilt shelf up at front until hooks drop into slots. Lower front of shelf to level position.
shelves
Gla66 shelves are heavy. Handle them with care.
9
