Whirlpool MCB790XT manual

2.Touch AUTO SET. (NOTE: Skip to Step 6 if you want to use the preset cooking time and Cook Power.)

3.Touch a Number Pad for the new cooking time you want from 1 to 9 minutes.

The AUTO SETIndicator Light will come on and the Display

will show 2 minutes, 30 seconds [or the time you have set as your favorite cycle).

The Display will show what you touched in even minutes. This example shows you touched 4 minutes.

..I.

El

4.Touch COOK POWER. (Option: Skip to Step 6 if you want to cook at high power.)

5.Touch a Number Pad for the Cook Power you want.

6. Touch START.

NOTE: You can set COOK or PROBE TEMP to follow Auto

for ‘Microwave Cooking at High Cook Power” (page Powers” (page 9) or ‘Cooking with the Temperature

The COOK POWER Indicator Light will come on and the Display

will show “P-HI:’

The Display will show what you touched. This example shows you touched Number Pad 5 for 50% of full power.

The AUTO SETIndicator Light will Stay on while the oven is cooking in the pre-

programmed cycle. If you selected a Cook Power other than high, the Cook Power Indicator Light will also come on. This shows the oven is cooking at a selected Cook Power.

The Display counts down the time to show how much cooking time is left.

When Auto Set ends, “End” will show on the Display and 4 beeps will sound. [You can stop the beeping by opening the door or by touching CANCEL.) “End” will remain on the Display and a beep will sound every 60 seconds

(to remind you that food is left in the oven] until the door is opened or CANCEL is touched. The Display will then show the time of day.

Set, if desired. Touch in instructions

81, “Microwave Cooking at lower Cook Probe” (page 16).