Whirlpool MH6150XL Number Codes, Start/Enter, Off/Cancel, Clock, Timer, ChildLock, Tones, Options

Models: MH6150XL

1 16
Download 16 pages 47 Kb
Page 7
Image 7
Number Codes

Number Codes

The microwave oven is preset with shortcut number codes. A number code includes one or more of the following: cooking power, cook time and food quantity or weight. See the code charts in the “Cooking” and “Reheating” sections for additional information.

Start/Enter

The START/ENTER pad begins any function. If not touched after touching a pad, “TOUCH START” will appear in the display.

If cooking is interrupted, touching START/ENTER will resume the preset cycle.

Off/Cancel

The OFF/CANCEL pad clears any incorrect command and cancels any program during cooking. It will not erase the time of day.

The microwave oven will also turn off when the door is opened. Close the door and touch START/ENTER to resume the cycle.

Clock

This is a 12 hour clock and does not show a.m. or p.m.

To Set:

Before setting, make sure the microwave oven and Timer are off.

1.Touch CLOCK.

2.Touch the number pads to set the time of day.

3.Touch CLOCK or START/ENTER.

Timer

The Timer can be set in minutes and seconds, up to 99 minutes 99 seconds, and counts down the set time. The Timer does not start or stop the microwave oven.

When the Timer is in use, the microwave oven can still operate. To see the time countdown for five seconds when the microwave oven is in use, touch TIMER SET.

To Set:

1.Touch TIMER SET.

2.Touch the number pads to set the length of time.

3.Touch START/ENTER.

When the set time ends, “END” will appear on the display and 7 tones will sound.

4.Touch TIMER OFF anytime to cancel the Timer.

Remember, do not touch the OFF/CANCEL pad because the microwave oven will turn off.

The time can be reset during the countdown by repeating the above steps.

ChildLock

The Child Lock shuts down the control panel pads to prevent unintended use of the microwave oven.

The Child Lock is preset unlocked, but can be locked.

To Lock/Unlock Control: Before locking, make sure the microwave oven and Timer are off. Touch and hold START/ ENTER for four seconds until two tones sound and “LOCKED” appears on the display. Repeat to unlock and remove “LOCKED” from display.

Tones

Tones are audible signals, indicating the following:

One tone

Valid pad touch (short tone)

Two tones

End of stage in multi-stage cooking

Child Lock active (short tones)

Three tones

Every Minute after end-of cycle tones, as reminder

Four tones

End-of-cycle

Five Tones

During DEFROST cycle, reminder to check, turn, rearrange, or separate food

Seven Tones

End of Timer countdown

Vent Fan

The vent fan has two speeds: HIGH and LOW.

To protect the microwave oven, if the temperature from the range or cooktop below the microwave oven gets too hot, the vent fan will automatically turn on. It may stay on for up to one hour to cool the microwave oven. When this occurs, the VENT FAN HIGH/LOW/OFF pad will not function.

To Turn Vent Fan On/Off: Touch VENT FAN HIGH/LOW/OFF pad once for HIGH, twice for LOW, and 3 times for OFF.

CooktopLight

The cooktop light has three options: on, night and off.

To Turn On/Night/Off: Repeatedly touch LIGHT ON/NIGHT/OFF to cycle through options.

Options

Preset values for tones, clock, display scrolling speed and defrost weight may be changed by using the Options function.

To Use: Touch OPTIONS. Then touch the number pad of the

function to be changed: 1 for Sound On/Off, 2 for Clock On/Off, 3 for Display Scroll Speed or 4 for Lbs/Kg Choice.

7

Page 7
Image 7
Whirlpool MH6150XL Number Codes, Start/Enter, Off/Cancel, Clock, Timer, ChildLock, Tones, Vent Fan, CooktopLight, Options