Changing the light bulbs
Electrical Shock Hazard
Before removing a light bulb, either unplug the refrigerator or disconnect the electricity leading to the refrigerator at the main power supply.
Failure to do so could result in electrical shock or personal injury.
To change the refrigerator light:
1.Disconnect refrigerator from power supply.
2.Push lightly on the top, center of the light shield until the notched tab unhooks from the Control Panel.
3.Pull down on the light shield until the tab clears the Control Panel.
4.Lift back hooks of light shield out of their slots.
5.Replace with a
6.Replace light shield in reverse order.
7.Reconnect refrigerator to power supply.
To change the freezer light:
1.Disconnect refrigerator from power supply.
2.Push in sides of light shield until they snap free.
3.Replace with a
4.Snap light shield into place.
5.Reconnect refrigerator to power supply.
NOTE: Not all commercial appliance bulbs will fit your refrigerator. Be sure to replace a bulb with one of the same size and shape.
Removing the base grille
To remove the grille:
1.Open freezer door.
2.Pull base grille forward to release the support tabs from the metal clips.
3.Do not remove Tech Sheet fastened behind the grille.
To replace the grille:
1.Line up grille support tabs with metal clips.
2.Push firmly to snap into place.
3.Close freezer door.
See cleaning instructions for defrost pan and condenser coils on page 15.
9’ w
Condenser coils
12
