1.Be sure surface unit controls are OFF.
Receptacle Bowl
Opening
2.Line up opening in the reflector bowl with the surface unit receptacle.
Terminal
ptacle
3.Hold the surface unit as level as possible
with the terminal just started into the receptacle.
4.While pushing the surface unit terminal into
the receptacle, lift a little on the edge of the unit nearest the receptacle.
5.When the terminal is pushed into the re- ceptacle as far as it will go, the surface unit will fit into the reflector bowl
Reflector bowls reflect heat back to the utensils on the surface units, They also help catch spills. When they are kept clean, they reflect heat better and look new longer.
If a reflector bowl gets discolored, some of the utensils used may not be flat enough. Or some may be too large for the surface unit. In either case, some of the heat that is meant to go into or around a utensil goes down and heats the reflector bowl. This ex- tra heat can discolor it.
CLEANING CHART
PART |
| WHAT | TO USE |
|
| |||
Outside | of | Soft | cloth, | warm | soapy | |||
cooktop |
| water |
|
|
|
|
| |
|
| Nylon | or | plastic | scouring | |||
|
| pad | for stubborn |
| spots | |||
Surface | units | No | cleaning | required | ||||
Control | knobs | Warm, | sudsy | water | and | |||
|
| bristle | brush |
|
|
| ||
Chrome | reflector | Automatic |
| dishwasher, | ||||
bowls |
| warm | soapy | water | or | |||
|
| plastic | scrubbing |
| pad | |||
Control | panel | Warm, | soapy | water |
| |||
HOW TO CLEAN
l Wipe off regularly when cooktop is cool.
l Do not allow food containing acids (such as vinegar, tomato, lemon juice or milk) to remain on surface. Acids will remove the glossy finish.
lDo not use abrasive or harsh cleansers.
l Spatters or spills will burn off.
lDo not immerse in water.
lWash, rinse and dry well. l Do not soak.
0 Clean frequently.
l Wash with other cooking utensils.
lDo not use harsh a brasives.
lWash, rinse and dry with soft cloth.
6
