Whirlpool RC8200XV Using your cooktop

Using your cooktop

Control knobs must be pushed in

betore turning them to a setting. They

can be set anywhere between HI

and OFF.

The solid dot in the surface unit

indicator shows which surface Unit

is turned on by that knob.

The signal light will glow when a sur-

face unit is on. NOTE: When the light

goes off the surface unit will still be

hot. Do not leave or store plastic,

pans or other items on surface

units.

Until you get used to the settings, use the following as a guide. For best results,

start cooking at the high settings; then turn the control knob down to continue

cooking.

Use HI to star-l Use MED-HI Use MED Use MED-LO Use LO to

foods cook- to hold a for gravy, to keep food keep food

ing; to bring rapid boil; to puddings cooking after warm until

liquids to a fry chicken and icing; to starting it ready to

boil. or pancakes. cook large on a higher serve. Set the

amounts of setting. heat higher

vegetables. or lower

within the LO

CAUTION: The use of the HI setting for long periods of time band to keep

can damage surface unlts and discolor chrome reflector food at the

bowls. Start cooklng on HI and turn control down to con- temperature

tlnue cooking. you want.