The Storage Drawer

The storage drawer is for storing pots and make it easier to clean under the range, anti-tip bracket.

pans. The drawer can be removed to and to check for installation of the

Use care when handling the drawer.

Removing- the Storage Drawer

1. Empty drawer of any pots and pans before removing drawer. Pull drawer straight out to the first stop. Lift front and pull out to the second stop.

2.Lift back slightly and slide drawer all the way-out.

Replacing the Storage Drawer

1. Fit ends of drawer sliz rails into the drawer guides on both sides of opening.

14

2. Lift drawer froxnd push in until metal stops on drawer slide rails clear white stops on drawer guides. Lift drawer front again

to clear second stop and slide drawer closed.

To verity the anti-tip bracket is engaged:

l Remove the storage drawer.

l Look to see if the anti-tip bracket is attached to floor with screws.

l Make sure one rear leveling leg is positioned under the anti-tip

brat ket.

0 See Installation Instructions for further details.

Page 14
Image 14
Whirlpool RF317PXW manual Removing- the Storage Drawer, Replacing the Storage Drawer