Whirlpool RF3300XP, RF330PXP manual Surface Unit Indicators, Signal light’, Use MED-HI, Use Lo to

I

I I’

OVEN TEMPERATURE CONTROL OVEN SIGNAL LIGHT OVEN SELECTOR

3VEN’LIGHT SWITCH	RIGHT FRONT’
CONTROL KNOB	CONTROL KNOB

Using the surface units

1 PUSHIN Turn to

- Setting

‘aI

I

Control knobs must be pushed in before turning them to a setting. They can be set anywhere between Hi and OFF.

Surface Unit Indicators

The solid dot in the surface unit indicator shows which surface unit is turned on bv that knob.

Signal light’

One of the signal lights will glow when a surface unit is on.

Until you get used to the settings, use the following start cooking at the high settings; then turn the control cooking.

as a guide. For best results, knob down to continue

Use HI to start		Use MED-HI			Use MED			Use MED-LO
foods	cook-	to	hold	a	for gravy,			to keep	food
ing; to	bring	rapid		boil; to	puddings			cooking	after
liquids	to a	fry	chicken		and	icing;	to	starting	it
boil.		or	pancakes.		cook	large		on a higher
					amounts		of	setting.
					vegetables.

CAUTION: The we of the HI sefflng for long periods of time can damage surface units and discolor ohfome reflector bowls. Start ccckhg on HI and fum conho down to con- ltnue cockha.

Use Lo to

keep food warm until ready to serve. Set the heat higher or lower within the LO hand to keep food at the temperature you want.

5