RIGHT FRONT | OVEN | OVEN TEMP |
CONTROL KNOB | SIGNAL LIGHT | CONTROL KNOB |
Using the surface units
PUSHIN Turn to Setting
Surface Unit Indicators
The solid dot in the surface unit indicator shows which surface unit is turned on by that knob.
Signal light
The Top Signal Light will glow when- ever a surface unit is on.
Control knobs must be pushed in before turning them to a setting. They can be set anywhere between HI and OFF.
Until you get used to the settings, use the following as a guide. For best results, start cooking at the high settings; then turn the control knob down to continue cooking.
Use | HI to | Use5or6 | Use 4 for | Use2or3 |
| |
start | foods | to hold a | gravy, | pud- | to keep | food |
cooking; to | rapld boil; to | dings | and | cooklng | after | |
bring | liquids | fry chicken | icing; | to cook | starting | It |
to a | boil. | or pancakes. | large | amounts | on a hlgher | |
|
|
| of vegeta- | settlng. |
| |
|
|
| bles. |
|
|
|
CAUTION: The use of the HI setting for long periods of time can damage surface units and discolor chrome reflector bowls. Start cooklng on HI and turn control down to con- tinue cooking.
use SIM to
keep food warm until ready to serve. Set the heat hlgher or lower to keep foods at
1the tempera- ture you want.
1 5
