7.
When the oven has cooled off
all the way,
wipe out any residue
or ashes from the bottom.
How the Self-Cleaning cycle works:
l
When oven controls are set to “CLEAN,” the oven gets much hotter
than it does for cooking. This high heat causes soil on the inside oven
walls to burn off. or break up and mostly disappear. While this is
happening, a special part in the oven vent helps remove smoke. Do
not cover the right-rear surface unit during the cleaning cycle.
l
The chart below shows about what happens during a Z-hour Self-
Cleaning cycle. Any time less than that shortens only the cleaning
cycle, not the heating and cooling times.
l
Don‘t touch the range during the cleaning cycle .it will be hot.
l
When the cleaning cycle is over, you will find some fine ashes in the
oven. The amount of ash depends upon the amount of soil there
was
in the oven.
When the oven is
cool, clean up all that is left with a
damp cloth, cleanser. or a soap-filled steel-wool pad.
l
During the cleaning cycle. you may hear the sounds of metal heating
and cooling. These are normal sounds, and a lot like those you can
hear when the oven heats for regular cooking.
SELF-CLEAN OVEN-LIGHT SOIL CYCLE
H hr.
1
hr.
1% hr. 2
hr.
2HI
91.
11