Whirlpool RS20AK, RS25AW, RS22BR Removing the freezer shelves, Using the ice and water dispensers

Removing the freezer shelves

To remove the shelf:

1.Lift right side of shelf off supports.

2.Slide shelf out of shelf support holes

3.Replace in reverse order.

Using the ice and water dispensers

(Model RS22BR - ice dispenser only)

Personal Injury Hazard

Tumbling ice and pressure can break a fragile glass. Use a sturdy glass when dispensing ice or water.

Failure to do so could result in personal injury or breakage.

Ice dispenses from the ice maker storage bin in the freezer. When you press the dispenser bar, a trapdoor opens in a chute between the dispenser and the ice bin. Ice moves from the bin and falls through the chute. When you release the dispenser bar, a buzzing sound may be heard for a few seconds as the trapdoor closes. The dispenser system will not operate when the freezer door is open.

To dispense ice:

1.Press a sturdy glass against the ice dispenser bar. Hold glass close to dispenser opening so ice does not fall outside of glass.

2.Remove the glass to stop dispensing.

NOTE: The first few batches of ice may have an off-flavor from new plumbing and parts. Throw the ice away. Also, take large amounts of ice from the ice bin, not through the dispenser.

Model RS22BR (ice only)

Models RS22AW and RS25AW (ice and water)

13