3.Pull the surface unit straight away from the receptacle.
Replacing
3.Hold the surface unit as level as possible with the terminal just started info the receptacle. Push the surface unit terminal info the receptacle.
4.Liff out the reflector bowl. See “Cleaning Chart” on page 17 for cleaning instructions.
2.Line up openings in the reflector bowl with the surface unit recep- tacle and the element hold down clip.
4.When terminal is pushed info the receptacle as far as if will go, push down the edge of the surface unit opposite the receptacle. The ele- ment hold down clip will keep the surface unit from moving around.
14