Whirlpool RT18HK warranty Changing the control, Settings, Adjusting the refrigerator shelves

Changing the control

If you need to adjust temperatures in refrigerator or freezer, use the settings listed in the chart below as a guide. If you have questions, call us. (See page 19.)

settings

l Adjust the Refrigerator Control first.

l Wait at least 24 hours between adjustments. l Then adjust the Freezer Control if nee’ded.

I	CONDITION:	REASON:
	If Refrigerator	Door	opened	often
	Section is	Large	amount	of food added
	TOO WARM	Room temperature			too warm
	If Freezer	Door	opened	often
	Section is	Large	amount	of food added
	TOO WARM	Very	cold room temperature
		(can’t	cycle often		enough)

RECOMMENDED CONTROL SETTINGS:

Refrigerator 6

FreezerD

Refrigerator

Freezeri

If Refrigerator		Controls		not		set correctly
Section is		for your		conditions
TOO COLD
If ICE	isn’t	Heavy	ice		usage
MADE	FAST	Very cold			room temperature
ENOUGH		(can’t	cycle			often enough)
If BOTH		Door	opened			often
SECTIONS		Large	amount of food added
are TOO WARM		Very warm or very cold room
		temperatures

Refrigerator

Freezer:

Refrigerator

Freezeri

Refrigerator 6

FreezerC

Adjusting the refrigerator shelves

Shelves can be adjusted to match the way you use your refrigerator.

To remove glass shelves:

1.Remove items from shelf.

2.Tilt shefl up at front.

3.Lift back of shelf.

4.Pull shelf straight out.

To replace glass shelves:

1.Guide the rear shelf hooks into the slots in the shelf supports on cabinet wall.

2.Tilt sheff up at front until hooks drop into slots. Lower front of shelf to level position.