Removing the crispers
To remove the crispers:
1.Slide crisper straight out to the stop.
2.Lii the front.
3.Slide out the rest of the way.
4.Replace in reverse order.
To remove the cover:
I, Push up the cover insert from the bottom, then slide out with both hands.
2.Lii front of cover frame.
3.Lii wver frame up and out.
To replace the cover:
1.Pit back of wver frame into notch sup- ports on back wall of refrigerator, then lower the front into place.
2.Slide back of cover insert into place, then lower the front.
and crisper cover
Irm
bQIIlk Pull out to
the stop, lift the front and pull again.
Remove the cover Insert. Lilt the cover front, then the back
NOTE: Handle glass insert with care. It could be heavy.
Adjusting the crisper cover track
(on some models)
For some models: For your convenience, one crisper may be larger than the other, and your crisper wver may have an adjustable center track so you can switch positions of the crispers. This allows you to store celery and other longer items in a crisper. You can adjust the wver center track with the wver in the refrigerator by removing the crispers and the wver insert.
To remove the center track:
1.Push up the wver insert from the bottom, then slide out with both hands.
2.Gently pull up on front end of track.
3.Pull rear end of track out of opening in cover.
To replace the center track:
1.Insert rear end of track (with hole) into opening in cover.
2.Lower front end of track into slot.
3.Make sure rear end of track has snapped into place on underside of cover.
