Whirlpool RT25BK warranty Changing the control, Settings, Adjusting the refrigerator shelves

Changing the control

If you need to adjust temperatures in refrigerator or freezer, use the settings listed in the chart below as a guide. If you have questions, call us. (See page 19.)

settings

l Adjust the Refrigerator Control first.

l Wait at least 24 hours between adjustments. l Then adjust the Freezer Control if needed.

CONDITION:	REASON:
If Refrigerator	Door	opened	often
Section is	Large	amount	of food added
TOO WARM	Room temperature			too warm
If Freezer	Door	opened	often
Section is	Large	amount	of food added
TOO WARM	Very	cold room temperature
	(can’t	cycle often		enough)

RECOMMENDED CONTROL SElTINGS:

Refrigerator 6

FreezerD

Refrigerator 4

FreezerA

		Controls not set correctly					Refrigerator	:
		for your		conditions			Freezer
TOO COLD
If ICE	isn’t	Heavy		ice	usage		Refrigerator	4
MADE	FAST	Very	cold		room temperature		Freezer	A
ENOUGH		(can’t	cycle often enough)
If BOTH		Door	opened			often	Refrigerator	:
SECTIONS		Large	amount			of food added	Freezer
are TOO WARM		Very	warm		or very cold room

temperatures

Adjusting the refrigerator shelves

Shelves can be adjusted to match the way you use your refrigerator.

To remove glass shelves:

1.Remove items from shelf.

2.Tilt shelf up at front.

3.Lii back of shelf.

4.Pull shelf straight out.

To replace glass shelves:

1.Guide the rear shelf hooks into the slots in the shelf supports on cabinet wall.

2.Tilt shelf up at front until hooks drop into slots. Lower front of shelf to level position.