STORAGE DRAWER (on some models)

Make sure drawer is cool and empty before cleaning. For more information, see “Storage Drawer” section.

■Mild detergent

Drawer Liner (on some models)

Remove all stored items from drawer and lift out drawer liner.

■Clean with mild detergent.

WARMING DRAWER and TRAY (on some models)

Make sure drawer is cool and remove tray.

■Mild detergent (for both)

2.Slowly close the door until it rests against the door removal pins.

3.Grasp the door on the sides with your fingers on the front of the door and your thumbs on the inside surface.

4.Pull door straight up, then toward you. Hinge hangers will slide out of front frame hinge slot. Do not remove door removal pins until the door is replaced on the range.

OvenLight

(onsomemodels)

The oven light is a standard 40-watt appliance bulb. It will come on when the oven door is open. It will not work during the Self- Cleaning cycle (on some models). On some models, when the oven door is closed, press OVEN LIGHT to turn it on or off.

Before replacing, make sure the oven and cooktop are cool and the control knobs are off.

To Replace:

1.Unplug range or disconnect power.

2.Turn the glass bulb cover in the back of the oven counterclockwise to remove.

3.Turn bulb counterclockwise to remove from socket.

4.Replace bulb and bulb cover by turning clockwise.

5.Plug in range or reconnect power.

OvenDoor

For normal range use, it is not suggested to remove the oven door. However, if removal is necessary, make sure oven is off and cool. Then, follow these instructions. The oven door is heavy.

Before Removing:

1.Use a putty knife or screwdriver and insert it at the bottom corner of the door stop clip.

2.Pry door stop clip free and remove from front frame hinge slot. Take care not to scratch finish.

3.Repeat procedure for other door stop clip.

To Remove:

1.Open the oven door. Insert door removal pins, included with your range, into both hinge hangers. Do not remove the pins while the door is removed from the range.

To Replace:

1.Grasp the door on the sides with your fingers on the front of the door and your thumbs on the inside surface.

2.Hold oven door so that the top edge of each hinge hanger is horizontal. Insert hinge hangers into the front frame hinge slots.

3.Tilt top of door toward range. Slide hinge hangers down onto front frame support pins. Make sure the hinge hangers are fully seated and engaged on the support pins.

4.Insert the door stop clip with the angular surface at the top of the frame hinge slot, then push in the bottom of the clip until flanges are flush with the front frame.

5.Open the door completely and remove the door removal pins. Save door removal pins for future use.

6.Close the door.

StorageDrawer

The storage drawer can be removed. Before removing, make sure drawer is cool and empty.

To Remove:

1.Pull drawer straight out to the first stop.

2.Lift up the back of the drawer and pull out.

To Replace:

1.Fit the ends of the drawer rails into the guides in the cavity.

2.Slide the drawer closed.

WarmingDrawer

(onsomemodels)

Remove all items from inside the warming drawer, and allow the unit to cool completely before attempting to remove the drawer.

17

Page 16 Page 18
Page 17
Image 17
Whirlpool SF196LEPB1 manual OvenLight, OvenDoor, StorageDrawer
Page 16 Page 18

SF196LEPB1 specifications

The Whirlpool SF196LEPB1 is a standout model in the realm of refrigeration, offering an impressive blend of innovative features, technology, and user-centric design. This refrigerator is designed to address the modern consumer's needs for both functionality and efficiency.

One of the main features of the SF196LEPB1 is its spacious interior, which provides ample storage capacity to accommodate a family’s needs. The refrigerator boasts an efficient compartment layout with adjustable shelves, allowing users to optimize space for larger items, such as tall bottles or casseroles. The inclusion of door bins and crisper drawers enhances organization, making it easy for users to access their essentials.

In terms of technology, the Whirlpool SF196LEPB1 employs advanced cooling systems designed to maintain consistent temperatures throughout the refrigerator and freezer sections. This ensures food stays fresh for longer periods, reducing waste and improving overall food safety. The refrigerator is equipped with a frost-free feature, which alleviates the need for manual defrosting, thus saving time and effort for the user.

Another noteworthy characteristic of the SF196LEPB1 is its energy efficiency. It is designed to consume less power than conventional models, helping users to reduce their electricity bills while minimizing their environmental footprint. This sustainability aspect is increasingly important in today’s eco-conscious market.

The design of the Whirlpool SF196LEPB1 also prioritizes aesthetics, featuring a sleek and modern exterior that fits seamlessly into various kitchen styles. Available in multiple finishes, including classic white, black, and stainless steel, homeowners can choose a look that best complements their kitchen decor.

Moreover, this refrigerator incorporates user-friendly controls, making it simple to adjust settings and monitor temperatures. Some models offer additional features like water and ice dispensers for added convenience.

In conclusion, the Whirlpool SF196LEPB1 is an exceptional refrigerator that combines practicality with advanced technology. Its spacious design, energy efficiency, and modern aesthetics make it a perfect choice for any household seeking reliability and style in their kitchen appliances. This model truly stands out as a testament to Whirlpool's commitment to quality and innovation.
Top Page Image Contents