Whirlpool SF357BEK dimensions Freestanding Gas Range, Product Model Numbers, Overall Dimensions

®

30" Freestanding Gas Range

PRODUCT MODEL NUMBERS

SF340BEH SF357BEK

SF341BEK SF357PEK

SF356BEK TGS325G

SF357BEH

Gas supply: Use 3/4" rigid pipe gas supply line to the range location. A smaller size pipe on long runs may result in insufficient gas supply. With L.P. gas, piping or tubing size can be 1/2" minimum. If local codes permit, it is

OVERALL DIMENSIONS

CLOCK	8.8:88
TIMER	TIMER

27-1/8" depth

recommended that new flexible metal tubing, design-certified by AGA or CSA, 4-5 feet long, 1/2-inch or 3/4-inch I.D., be used for connecting the range to the rigid gas supply line. A 1/2" male pipe thread is needed for connection to pressure regulator female pipe threads. An individual manual shutoff valve must be located in the same

with handle

46-7/8" overall height

room, but external to the range.

Electrical: A 120-volt, 60-Hz, AC-only,

10-ampere, electrical supply fused on both sides of the line. A separate circuit is recommended. A time-delay fuse or circuit breaker is recommended.

36"

cooktop

height

25"

29-7/8" width

CABINET OPENING DIMENSIONS

13" max. upper cabinet depth

30" min. cabinet opening width

30-1/8" opening

For minimum clearance to top of cooktop, see Note.***

18" min.

clearance upper

cabinet to

countertop

2" min.

countertop

space to side

wall or other

combustible

material

8"

Contact a qualified floor covering

installer to check that the floor

covering can withstand at least

200˚F.

width

17"

2"

8"

17"

4-1/2"

2"

Do Not pinch the power supply cord between the range and the wall.

Do Not seal the range to the side cabinets.

If cabinet depth is greater than 24", oven frame must extend beyond cabinet fronts by 1/2" min.

Use an insulated pad or 1/4"
plywood under range if installing
range over carpeting.	4-1/2"

This shaded area recommended for installation of rigid gas pipe.

Flexible gas pipe and electrical outlet are recommended in either shaded area.

***Note: 30" min. when bottom of wood or metal cabinet is protected by not less than 1/4" flame retardant millboard covered with not less than No. 28 MSG sheet steel, 0.015" stainless steel, 0.024" aluminum or 0.020" copper.

36" min. clearance between the top of the cooking platform and the bottom of an unprotected wood or metal cabinet.

Because Whirlpool Corporation policy includes a continuous commitment to improve our products, we reserve the right to change materials and specifications without notice.

Dimensions are for planning purposes only. For complete details, see Installation	Ref. 8273169 Rev. A
Instructions packed with product. Specifications subject to change without notice.	08-20-02