Whirlpool SF365PEG warranty Setting the Controls, Locked/Cleaning

USING THE SELF-CLEANING CYCLE

SETTING THE CONTROLS

1.Set the oven control knob to CLEAN.

The door will lock itself within 6 seconds. If the door has a problem locking, it will try to lock itself for 1 minute. If the door fails to lock, the Self-Cleaning cycle will cancel. An error code will be displayed.

NOTE: Do not attempt to open the door while in the locking mode.

PUSH AND TURN

BROILWARM

200

CLEAN 250

300

350

500400

450

YOU SEE

OVEN ON light goes on. DOOR LOCKED/CLEAN- ING light flashes until you close door, then is solid. HEAT- ING light goes on when oven starts heating.

2. Set the cleaning time (optional).	PRESS
Press the “up” (s) or “down” (t) pad(s) to
select a clean time between 2 hours, 30
minutes and 4 hours, 30 minutes.
NOTE: The Self-Cleaning cycle will
automatically set a 31⁄2 hour cycle unless a
different time is selected.
3. During the last 30 minutes of the Self-Cleaning	YOU SEE
cycle the oven will start to cool down.	OVEN ON and DOOR
	LOCKED/CLEANING
	lights are on. HEATING
	light goes off and COOL
	appears in display.

Once the oven goes below the locked temperature:

YOU SEE

OVEN ON light flashes.

DOOR LOCKED/ CLEANING light goes out when door unlocks.

4. Turn the oven control knob to OFF.	TURN
	BROIL	WARM
		200
	CLEAN	250
		300
		350

YOU SEE

OVEN ON light goes out and time of day appears in display.

500400

450

5.After the oven is cool, wipe off any residue or ash with a damp cloth or sponge.

If needed, touch up spots with a mild abrasive cleanser or cleaning sponge.

continued on next page

19