Changing the Drum Light, To change drum light

CARING FOR YOUR DRYER

CHANGING THE DRUM LIGHT

The dryer light automatically turns on inside the dryer drum when you open the door. See instructions below to change your drum light.

1.Unplug the dryer or disconnect the electricity leading to the dryer at the main power supply.

2.Open the dryer door. Remove the light bulb cover from the back wall of the dryer by removing the screw located in the lower right corner of the

cover.

4.Replace the bulb with a 10-watt appliance bulb only.

5.Replace the light bulb cover.

3. Remove the light bulb by turning it	6. Reconnect power supply.
counterclockwise.

Image 16

Contents

Electric 3406074A Thank you for buying an Estate appliance Please record your modelÕs information Dryer Safety On next Dryer Safety Other doors Parts and FeaturesLarge side-swing door Checking Your Vent WWARNING Checking Your Vent Using Your Dryer Starting Your Dryer Cycle and temperature tips LoadingLoading suggestions Drying tips Model TEDX640E Auto Sense DryingTimed Dry cycles No Heat Fluff Model TEDS680E Timed Dry cycle Type of Load No Heat Fluff Cycle No Heat Fluff CycleRUBBER, PLASTIC, HEAT-SENSITIVE Fabrics Using the Drying Rack Rack DRY Cycle Temperature TimeWool sweaters Stuffed toys or pillows Cleaning the Lint Screen Every load cleaningAs needed cleaning Caring for Your Dryer Cleaning the Dryer Interior Lint SignalTo clean dryer drum Changing the Drum Light To change drum light Common Drying Problems TroubleshootingProblem Cause Solution Lint in load Stains onLoad Items Assistance or Service If YOU Need Assistance or ServiceIf YOU Need Replacement Parts For Further Assistance From Date of Purchase Service companyWhirlpool Corporation will not PAY for