Whirlpool TS22BR warranty Changing the control, Settings, Adjusting the refrigerator shelves

Changing the control

If you need to adjust temperatures in refrigerator or freezer, use the settings listed in the chart below as a guide. If you have questions, call us. (See page 22.)

settings

l Adjust the Refrigerator Control first.

l Wait at least 24 hours between adjustments. l Then adjust the Freezer Control if needed.

I CONDITION:

If Refrigerator

Section is

TOO WARM

If Freezer

Section is

TOO WARM

REASON:

Door opened often

Large amount of food added Room temperature too warm

Door opened often

Large amount of food added Very cold room temperature (can’t cycle often enough)

RECOMMENDED

CONTROL SElTINGS: I

Refrigerator

Freezeri

Refrigerator 3

FreezerC

If Refrigerator	Controls	not set correctly	Refrigerator	2
Section is	for your	conditions	Freezer	B
TOO COLD

If ICE isn’t

MADE FAST ENOUGH

If BOTH SECTIONS

are TOO WARM

Heavy ice usage

Very cold room temperature (can’t cycle often enough)

Door opened often

Large amount of food added Very warm or very cold room temperatures

Refrigerator 3

FreezerC

Refrigerator 4

FreezerB

Adjusting the refrigerator shelves

Shelves can be adjusted to match the way you use your refrigerator.

To remove shelves:

1.Remove items from shelf.

2.Tilt shelf up at front.

3.Lift shelf up at back.

4.Pull shelf straight out.

To replace shelves:

1.Guide the rear hooks into the slots in the shelf supports.

2.Tilt up front of shelf until hooks drop into slots.

3.Lower front of shelf to level position.

8